Eugenol (99%, C10H12O2) was obtained from Aldrich, USA Commercia

Eugenol (99%, C10H12O2) was obtained from Aldrich, USA. Commercial Ayurvedic formulations (plants) like Caturjata (tvak, ela, patra, kesera), 20Sitopaladi Churna (Cinnamomum verum zeylanicum-pippali, ela, tvak), 20Lavangadi Vati (lavanga, marica, aksaphala, khadirasara, babbula), 20Jatiphaladi Churna (Cannabis sativa-jatiphala, lavanga, ela, JAK phosphorylation patra, tvak, nagakesara, candana, tila, tvaksiri, tagara, amla, talisa, pippali, pathya, sthulajiraka), 20and clove oil (Syzygium aromaticum)

20 containing eugenol were purchased from local markets. HPLC grade methanol was procured from Merck Specialist Private Limited (Mumbai, India). Distilled water was prepared in-house using Millipore (Millipore S.A. Molsheim, France). All other chemicals used were of analytical grade. A stock solution of 1000 ppm was prepared by accurately weighing 10 mg of eugenol standard in a 10 mL volumetric flask and it was further diluted with HPLC grade methanol up to the mark. The GDC-0199 cell line solution was vortexed for 10 s. 1 g of ayurvedic formulations were taken in 10 mL of methnol and then solvent extraction was performed using a rotary shaker for 24 h. The tubes were centrifuged at 4000 rpm for 10 min and the solution was filtered with Whatman filter paper no. 41. The filtrate was collected in polypropylene tubes and stored at 4 °C until further analysis.

Furthermore, the filtrate was given appropriate dilution in mobile phase prior to injection on to the HPLC system. The HPLC system used for quantification of eugenol consisted of a Jasco PU-980 pump, AS-2057 auto sampler and Jasco UV-970 detector. The chromatogram peaks were quantified by means of PC based Borwin software (Version 1.5). Chromatography separation for analyte was achieved on cosmosil C18 analytical column (150 mm × 4.6 mm, 5 μ) maintained at ambient temperature. The mobile phase Ketanserin was pumped at a flow rate of

1 mL/min. The mobile phase was filtered through a 0.45 μ nylon membrane filter and degassed in an ultrasonic bath prior to use. The injection volume was 30 μL, the flow rate was 1.0 mL/min and a chromatographic peak was detected at 215 nm. The entire experimental analysis was according to the ICH guidelines and was validated for calibration curve, limit of detection, limit of quantification, system suitability, precision, accuracy, solution stability and ruggedness.21 Marketed commercial formulation samples of Caturjata Churna, Lavangadi Vati, Sitopaladi Churna, Jatiphaladi Churna and clove oil were accurately weighed in weighing balance. Later they were transferred to Tarson tubes, filled with methanol and kept overnight on rotator shaker. These tubes were subsequently centrifuged, filtered and stored in fridge for further HPLC analysis.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>